GRINDING & HONING
Our range of precision grinding and honing equipment ensures short lead times when required.
Our plain cylindrical grinding capacity encompasses diameters up to 800mm and long shaft grinding up to 6,000mm capacity. This is complemented by our turning capacity. Our internal grinding capacity for bores from 25mm up to 560mm is capable of holding tight tolerances down to .012mm. Universal grinding, surface grinding and honing complete our surface finishing capacity.
EXTERNAL GRINDING
| CHURCHILL – PLAIN CYLINDRICAL GRINDER | 800mm DIA. X 5 m CENTRES | 5 TONS MAX |
| COMETA – UNIV. GRINDER | 600mm DIA. X 4,1 m CENTRES | 3 TONS MAX |
| MATRIX UNIVERSAL GRINDER | 400mm Dia x 3 m centres | 2 TONS MAX |
| NEWALL- PLAIN CYLINDRICAL GRINDER | 400mm DIA X 2,5 m CENTRES | 1.5 TONS MAX |
| TOZ – UNIV. GRINDER | 300mm DIA. X 2 m CENTRES | 0.5 TONS MAX |
| CHURCHILL – PLAIN CYLINDRICAL GRINDER | 280mm DIA. X 1 m CENTRES | |
INTERNAL GRINDING
| HEALD GRINDER (2 off) | 760mm CHUCK CAPACITY –560mm BORE X 610mm STROKE LENGTH |
| CHURCHILL GRINDER | 480mm CHUCK CAPACITY –330mm BORE X 400mm STROKE LENGTH |
| CHURCHILL GRINDER | 480mm CHUCK CAPACITY – 250mm BORE X 400mm STROKE LENGTH |
SURFACE GRINDING
| FAVRETTO – MAGNETIC TABLE | 2 m Stroke 500mm Traverse 400mm Under Wheel |
TOOL & CUTTER GRINDING
| CINCINATTI | NO.2 TOOL & CUTTER GRINDER |
HONING
| “CUSTOM BUILT” | HORIZONTAL STROKE – 4.25m by 760mm Maximum Diameter |
| (2) DELAPENA BEAM STROKERS | 1,5 m Stroke by 400mm MAX DIA. |
GRINDING & HONING
TURNING
MILLING, BORING & DRILLING
SITE EQUIPMENT
WELDING & PLATING EQUIPMENT